Browse New, Used, and Rebuilt Inventory in Stock



Condition Model S/N Description Delivery
NEW DPM-1QT
Double Planetary Mixer Batch Change Can
Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 Flexi-Lip Sealed Gearbox and HV Blades, 150-Grit, 2-2" S&G Ports, Viton, Can-Hood Clamps, 50psig Vac Internally Machined Mix Can with Thermo, Bench w/level mounts. Can-Hood Clamps. Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with start/stop, speed control, displays for speed, load, temp and cycle timer, speed and temperature calibration, E-Stop, Fused Rotary Disconnect. STOCK

Request Quote

NEW DPM-2
Double Planetary Mixer Batch Change Can
1.5HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Tefloflex, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 100 psig ss jacket, Int-Mach, Thermo, 1" Ball Valve, Casters, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. 6-WEEKS

Request Quote

NEW DPM-4
Double Planetary Mixer Batch Change Can
213724 2HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 50 psig ss jacket, Thermo, 1"TC Ball Valve, Caster, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. STOCK

Request Quote

RECON DPM-1QT
Double Planetary Mixer Batch Change Can
104335 Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 Gearbox and Rect Blades, 150-Grit, 2-2" S&G Ports, Viton, Can-Hood Clamps, Mix Can with 30psig Jacket (No Valve). Nema 12 Control Panel, VFD w/Keypad, Estop & Disconnect, 3/60/230v. Vacuum Pump w/On/Off/Starter. Bench w/Casters. (CHECK SPECS UPON RETURN) TBD

Request Quote

RECON DPM-1QT
Double Planetary Mixer Batch Change Can
213810 Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 Gearbox and Rect Blades, 150-Grit, 2-2" S&G Ports, Viton, Can-Hood Clamps, Mix Can, Vac with 1/2" Ball Valve. Nema 7/9 XP Control Panel, Start/Stop/Pot/Estop, Color Screen with displays for speed and load, VFD mounted in XP panel, 1/60/115v Input, 3/60/230v Output. STOCK

Request Quote

RECON DPM-4
Double Planetary Mixer Batch Change Can
111647 2HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, Vacuum Hood & Rect Blades, Viton, Sealed Flexi-Lip Gearbox (T316), 2-3" ports, hood-can clamps, Mix Can, T304, 80-grit, Non-Jacketed, 1"TC Ball Valve, Casters, Air/Oil Lift w/two-hand controls, Nema 7/9 XP Control Panel 3/60/460v, Speed Display, Start/Stop/Pot, VFD, E-Stop,mounted and wired. BENCH w/level mounts. (CHECK SPEC UPON RETURN) TBD

Request Quote

RECON DPM/DS-4HD
Double Planetary Mixer Batch Change Can
108077 DPM-4HD AND DS-4HD on a Common Bench with XP controls and Vacuum Pump. 3-HP, XP 3/60/230 volt, T304, 150-Int, 80-Ext, Vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" TC ports w/Metaglass, hood-can clamps, 100 psig ss jacket, Int Mach, Thermo (RTD), 1-1/2" Cove Plug, Casters, Air/Oil Lift w/two-hand controls, XP Local Operator Control Panel, XP Junction Box, 3/60/230v, Color Display with Speed, Load, Time (hour meter) & Temp Displays, E-Stop, XP panel mounted and wired. Nema 12 Remote Control Panel with VFD, Fuses, Disconnect, Ethernet Data Port (Panel is loose). Common Bench w/Casterss. Vacuum Pump (XP) with valves/filters/gauge, mounted/wired. DS designed for 200psig, with XP Start/Stop. 2-3 WEEKS

Request Quote

NEW DPM-40
Double Planetary Mixer Batch Change Can
Air/oil hydraulic lift, 15HP XP Mechanical Vari-drive, Vacuum, T316 80-grit Int, Blast Ext, HV Stirrer blades, two-3" TC S&G ports, one 1"NPT port, Viton, Sealed Cast Iron Gearbox (painted), Can-Hood Clamps, T316, Mix Can, Vacuum, DS-Rated, 80-grit, 15 psig SS jacket, RTD Thermo, 2" FBBV, Casters. TBD

Request Quote

NEW DPM-40
Double Planetary Mixer Batch Change Can
115162 Air/oil hydraulic lift, 15HP TEFC Mechanical Vari-drive, Vacuum, T316 80-grit Int, Blast Ext, HV Stirrer blades, two-3" TC S&G ports, one 1"NPT port, Viton, Sealed Cast Iron Gearbox (painted), Can-Hood Clamps, T316, Mix Can, Vacuum, DS-Rated, 80-grit, 25 psig SS jacket, RTD Thermo, 2" FBBV, Casters. Controls to be added (will add 2-4+ weeks to lead time). STOCK

Request Quote

RECON DPM-10
Double Planetary Mixer Batch Change Can
101354 Air/oil hydraulic lift, 3HP XP VFD direct drive, Vacuum, T316-Vacuum Hood, 80-grit Int/Ext, T316-Rect Stirrer blades, two-3" S&G ports, one 1"NPT port, FlewxiLip Seals, Viton, Cast Iron Gearbox (painted), Side-wall Scraper. Mix Can, Vacuum, DS-Rated, 80-grit, 50psig CS jacket, 2" FBBV, Casters. 1-2 WEEKS

Request Quote

RECON HDM-10
Double Planetary Mixer Batch Change Can
34010 Air/oil hydraulic lift, 5HP TEFC VFD direct drive (Retro-fit), Vacuum, T304-Vacuum Hood, 80-grit Int, 320-media blast Ext, T304-Rect Stirrer blades, one-3" S&G port, one 1"NPT port, Viton, Cast Iron Gearbox (painted). HDM-10 MIX CAN #48096CAN, SS-304, Vacuum, 15psig CS Jacket, 80-grit, 2" NPT Ball Valve BOTTOM OFF-CENTER, thermo (cone style), Trunions, Casters. 4-5 WEEKS

Request Quote

RECON HDM-25
Double Planetary Mixer Batch Change Can
44776 Air/oil hydraulic lift, 15HP XP VFD direct drive, Vacuum, T316-Vacuum Hood, 80-grit Int/Ext, T316-Rect Stirrer blades, two-3" S&G ports, one 1"NPT port, 1-4" ANSI Sight Port, Viton, Cast Iron Gearbox (painted), T304-Mix Can, Vacuum, 80-grit, 15psig SS jacket, Trunions, Casters. (NO OUTLET) 2-3 WEEKS

Request Quote

RECON HDM-40
Double Planetary Mixer Batch Change Can
200569 Air/oil hydraulic lift w/air operated controls, VACUUM, 15HP XP V-Belt, VFD drive, T304, 150-grit Int, 80-grit Ext, Viton, Stainless Steel Fabricated Gearbox, HV Blades, Two -3" S&G ports, one 1" NPT, MIX CAN, SS-304, Vacuum, 50 psig CS jacket, 2" BV NPT Outlet On-Center, Clamp Pads, Low Profile Thermo, casters (DPM Style)(Could be used with DS). 1-2 WEEKS

Request Quote

NEW PDM-40
Power Mix Planetary Disperser Planetary Mixer Batch Change Can
**** Air/Oil lift, Vacuum, SS-316, Viton, 80 grit, STD Carbon Steel Gearbox w/caps and Viton gaskets, 7.5HP XP Stirrer, 15HP XP Disperser, 1 - 6" w/cap & 1 - 1" NPT plus 2-3" S&G ports, Mix Can, Int Mach, 2" FBBV, Casters, 50psig SS jacket, RTD thermo. Controls to be added (will add 2-4+ weeks to lead time). TBD

Request Quote

RECON PDM-2
Power Mix Planetary Disperser Planetary Mixer Batch Change Can
109806 Air/oil Reverse Lift, SS-304, Vac, 80grit, viton, SS sealed gearbox, 2-3" ports, 1HP XP planetary, 1.5HP XP disperser w/3" HSD Blade, side/bottom scraper, MIX CAN 50psig jacket, thermo, int mach, casters, XP Panel two Start/Stop/Speed, E-Stop, two Dig Speed readouts and temp meter, mounted/wired to mixer, Nema 4 Remote VFD panel 1-PHASE/60/230v input, 3-Phase output, with two VFD's, terminal strip and Disconnect, Bench w/level mounts. 1 WEEK

Request Quote

RECON PDM-2
Power Mix Planetary Disperser Planetary Mixer Batch Change Can
209539 Air/oil Reverse Lift, SS-304, Vac, 80grit, viton, SS sealed gearbox, 2-3" ports, 1HP TEFC planetary, 3 HP TEFC disperser w/3" HSD Blade, Mix Can, 100psig SS Jacket, Thermo, 1" Ball Valve, Casters, Panel 3/60/230v E-stop Disconnect Temp Meter, Bench. 1 WEEK

Request Quote

RECON PDM-2
Power Mix Planetary Disperser Planetary Mixer Batch Change Can
208245 Air/oil Reverse Lift, SS-304, Vac, 80grit, viton, SS sealed gearbox, 2-3" ports, 1HP TEFC planetary, 2 HP TEFC disperser w/3" HSD Blade, Mix Can, Vac, 15psig Jacket, 1" Ball Valve, I/M, Thermo, Casters, Can-Hood Clamps, Side & Bottom Scrapers. Nema 12 Control Panel 3/60/230v E-stop Disconnect Temp Meter, Bench. VAC PUMP 1 WEEK

Request Quote

RECON PD-40
Power Mix Planetary Disperser Planetary Mixer Batch Change Can
68781 Air/Oil lift, Vacuum, SS-304, Viton, 80 grit-Int/ext, Cast Iron Gearbox w/Dust Shield, 7.5HP XP Stirrer, 10HP XP Disperser, Sidewall Scraper, Rectangular Stirrer Blade, 3 - 4" S&G port, 1 -1-1/2" port, 1-1" port. Mix Can, Vacuum, T304, Int Mach, 2" NPT Ball Valve (on-center), Casters. 3-4 WEEKS

Request Quote

NEW VMC-10
Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer
* SS-316, 150-grit int, 80-grit ext, Vacuum, XP Motors, 2-3" S&G ports, 1-1" NPT port, RTD Thermowell, Viton, 50 psig CS jacket, 2" FBBV, Casters, 80 grit, 3HP anchor w/scrapers, 5HP ME/SLIM bushingless w/Large Sq Hole Stator, 5HP disperser w/4-1/2" blade. 8-10 WEEKS

Request Quote

NEW VMC-40
Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer
* SS-316, 150-grit int, 80-grit ext, Vacuum, Mechanical Seals, Teflon/TES/Kalrez, XP Motors, 2-3" S&G ports, 2-1-1/2" TC ports, RTD Thermowell, 4-Clamps, 50 psig SS jacket, 2" FBBV-TC, Casters, 80 grit, 5HP anchor w/scrapers, 5HP ME/SLIM bushingless w/Large Sq Hole Stator, 7.5HP disperser w/6" blade. 4-5 WEEKS

Request Quote

NEW CDA-50
Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer
* SS-304/80, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 50 psig cs jckt, 2" Ball Valve, Casters, FlexiLip seals, Viton, 7" Disp blade w/10HP TEFC motor, 2-Wing Anchor w/5HP TEFC motor, 3/60/230/460v. (TA) Select required controls. UPGRADE TO T316/150-GRIT AVAILABLE. STOCK

Request Quote

NEW CDA-100
Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer
* SS-304/80, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 50 psig cs jckt, 2" Ball Valve w/6" clearance, Casters, FlexiLip seals, Viton, 8" Disp blade w/15HP TEFC motor, 2-Wing Anchor w/10HP TEFC motor, 3/60/230/460v. Select required controls. UPGRADE TO T316/150-GRIT AVAILABLE. STOCK

Request Quote

NEW CDA-200
Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer
* SS-304/80, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 50 psig cs jckt (1.5"NPT ports), 2" Ball Valve (NPT) w/6" clearance, Casters, 80 grit int, FlexiLip seals, Viton, 12" Disp blade w/20HP TEFC motor, 2-Wing Anchor w/10HP TEFC motor, 3/60/230/460v. Select required controls. UPGRADE TO T316/150-GRIT AVAILABLE. STOCK

Request Quote

RECON CDA-150
Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer
70635 SS-304, Vac, Viton, change-can, DUAL POST air/oil hyd lift on free standing floor base, Vac cover w/Two 1" FNPT ports, two 3" S&G ports, One 6" 150# ANSI loading port, two (2) 2" 150# ANSI ports, one 1-1/2" NPT port, Double Flexi Dry Running shaft seals (Retrofit), Mix Can, Dished Bottom, 15psig @ 300f CS Jacket on side walls only, 2" 150# ANSI at 16" off floor, Casters, Mill Finish, 11" Disp blade w/15HP XP motor direct drive at 1750rpm, 2-Wing Anchor and 10HP XP motor at 45rppm, 3/60/230/460v. No Controls. 1999 4-5 WEEKS

Request Quote

NEW Collection Tank, 20-LITER
Pressure Vessel Storage Tank
**** Collection Tank, Vacuum, 20-Liter, SS-304 Stainless Steel, push/pull handle, 2B finish, stainless steel cart with wheels, Tank top Head has three (3)-3/4"half couplings and (1)-2"RFSO flange in center, 100 PSIG internal pressure rating w/ASME stamp, 1/2 threaded drain on bottom with 2 way stainless steel valve and threaded outlet. (#D-498) STOCK

Request Quote

NEW TANK, 200-GAL
Pressure Vessel Storage Tank
102482-A 200-gallon working, 250-gal full, mixing vessel. T316L, 240-grit Int, 180-grit Ext. 40" OD X 40.25" St Side rated for 13psig internal pressure at 212f. Removable dished cover (clamps). ASME 100psig/350f Jacket on sides only. Insulated (2") side/bottom sheathed in stainless steel T304 (welded). 2" MCF Ball Valve w/actuator, bottom center at 5.75" off floor, legs designed for addition of load cells. Two (2) Thermowells, bottom and sidewall. 18" Manway, two (2) 1-1/2"TC port w/Gama Jet VI spray machines, 25gpm@45psi 360-degree, 3" TC w/XP Fibre Optic Light, 3" TC sight glass/port, 2" TC, foru (4) 1" TC, lifting lugs. #D5557 STOCK

Request Quote

NEW TANK, 200-GAL
Pressure Vessel Storage Tank
102482-B 200-gallon working, 250-gal full, mixing vessel. T316L, 240-grit Int, 180-grit Ext. 40" OD X 40.25" St Side rated for 13psig internal pressure at 212f. Removable dished cover (clamps). ASME 100psig/350f Jacket on sides only. Insulated (2") side/bottom sheathed in stainless steel T304 (welded). 2" MCF Ball Valve w/actuator, bottom center at 5.75" off floor, legs designed for addition of load cells. Two (2) Thermowells, bottom and sidewall. 18" Manway, two (2) 1-1/2"TC port w/Gama Jet VI spray machines, 25gpm@45psi 360-degree, 3" TC w/XP Fibre Optic Light, 3" TC sight glass/port, 2" TC, foru (4) 1" TC, lifting lugs. #D5557 STOCK

Request Quote

NEW TANK, 300-GALLON
Pressure Vessel Storage Tank
SF-747C ASME Code, Horizontal Vessel, 300-Gallon, SN# SF-747C, with two saddles, 41" OD x 60" straight wall, rated for 500psig at 302 s f, SS-316, (2) 4" 300# RFSO, (1) 6" 300# RFSO, (1) 2" 300# RFSO, (1) 2" FNPT, (2) 1" 300# FNPT, (2) 3/4" 3000# FNPT. STOCK

Request Quote

RECON DS-1QT-SS
Discharge System Press
72571 DS-1QT-SS, 110psig under platen. Extended height. All Stainles Steel construction, bench and DS bridge sheathed in SS. T304, Viton, 1/2HP TEFC, 1/60/115/230 volt, Nema 4X on/off/starter with Raise/Lower Selector Switch and E-Stop. Raise/Lower foot pedal controls. With Stainless Steel Benchw/leveling pads. Pressure Chart. 2-WEEKS

Request Quote

RECON DS-1QT
Discharge System Press
208949 DS-1QT, 110psig under platen, T304, Viton, 1/2HP TEFC, 3/60/230 volt, Nema 12 on/off/starter. With Benchw/leveling pads. Pressure Chart. STOCK

Request Quote

RECON CDS-2
Discharge System Press
55608 CDS-2, Old "C" frame design with Double Orings, 65psig under the platen, 1" MNPT Vent on platen w/plug, SS-304, 80-grit finish, Viton, TEFC, 3Ph, 60Hz, 230 volt. Nema 12 on/off starter, 1/2hp 3/60/230V. Cast Base with cut out for ball valve. CAN NOT BE USED WITH CASTERS ON MIX CAN. No bench. 3-WEEKS

Request Quote

RECON DS-2
Discharge System Press
71249B DS-2 Special design. 1/60/208v, 1/2HP TEFC. 200psig under platen. T304. Viton. Quick Disconnect platen. For use with standard 2-gallon mix cans (thicker platen for use with up to 1-1/4" cove plug). Platen has three air vent/release valves for automatic venting. Bench w/leveling pads. Nema 12 panel, disconnect, start (ILLUM). stop, starter for hyd pump, raise/off/lower, safety PB, e-stop, directional control valve, limit switch to prevent operation with can removed. 2-3 WEEKS

Request Quote

RECON DS-4
Discharge System Press
63346B DS-4 Old Standard w/Double Oring Platen, 40psig under the platen, 1/4" MNPT Vent on platen w/valve, SS-304, 80-grit finish, Viton, 1/2HP XP 3Ph, 60Hz, 230/460 volt. With bench. 1-WEEK

Request Quote

RECON DS-4
Discharge System Press
100250 DS-4 Special design for special 4-gal 11" ID cans. Matched for use with LDM-4 #76405. 1/60/208v, 1/2HP TEFC. 200psig under platen. T304. Viton. Quick Disconnect platen. Safety enclosure made from 1/2" thick Lexan. For use with standard 1-gallon mix cans (thicker platen for use with up to 1-1/4" cove plug). Platen has three air vent/release valves for automatic venting. Bench w/leveling pads. Nema 12 panel, disconnect, start (ILLUM). stop, starter for hyd pump, raise/off/lower, safety PB, e-stop, directional control valve, limit swithces to prevent operation with door open and/or can removed. 2-3 WEEKS

Request Quote

RECON DS-10
Discharge System Press
110168 Standard, SS-304 80-grit, 50psig, Viton, raised base (20" under valve), 3/4HP XP, Nema 12 On/Off/Starter 3/60/230v. (Transferred from NY-Lab 1/31/19) STOCK

Request Quote

NEW TRM 2.5 X 5
Three Roll Mill
114821 2.5 X 5 Three Roll Mill, 1/2HP XP motor, bench/table top model, XP safety trip switch. Stainless Steel 440c precision ground rolls, cored for water cooling/heating. Adjustable SS Apron, Teflon End plates. Nip Block. Add controls, bench and/or other options. 6-8 WEEKS

Request Quote

NEW TRM 2.5 X 5
Three Roll Mill
114822 2.5 X 5 Three Roll Mill, 1/2HP XP motor, bench/table top model, XP safety trip switch. Stainless Steel 440c precision ground rolls, cored for water cooling/heating. Adjustable SS Apron, Teflon End plates. Nip Block. Add controls, bench and/or other options. 6-8 WEEKS

Request Quote

NEW TRM 4 X 8
Three Roll Mill
* XP motor, floor model, Stainless Steel Rolls, Nema 12 start/stop/starter. 6-8 WEEKS

Request Quote

NEW TRM 5 X 12
Three Roll Mill
* XP motor, standard spec's per price sheets. STOCK

Request Quote

RECON TRM 4 X 8
Three Roll Mill
69745 Ross, 4X8 TRM, 2HP XP motor, floor model, water cooled CS 52100 rolls, hand wheel roll adjustments, bronze end guides, take off apron. KENT #19027 1-WEEK

Request Quote

RECON TRM 13 X 32
Three Roll Mill
3245 LEHMANN Three Roll Mill: Mill has a 40 hp, two speed, 480 v- 3 phase non-xp motor. bronze endplates with chilled iron rolls. The apron is manually adjusted, the roll adjusters are also manual, equipped with a standard stop/start control. E-Stop with a safety trip switch across the top. 3-4 WEEKS

Request Quote

RECON KE-15
Kneader Extruder
38794 KE-15 CLASS-V, SS-304, 15HP Sigma Blades (Cored), 5HP Extrusion Screw (Cored), 42psig CS Jacket, N12 controls (single speed sigma, variable speed screw) 460V.S/N C11472 STOCK

Request Quote

RECON V-3.5
Vertical Cone Screw Blender Vacuum Dryer Dry Blender Vertical Blender
67934 Vacuum/30psig/375f, ASME Stamped, SS-304 wetted parts, Viton, dished head, 8" Hinged port w/4" sight port, 2-2" tri-clover ports, 1/2" FNPT, 2 CIP nozzles, 3-1/4" port w/light, ASME Stamped 50psig/375f jacket w/ 1-1/2" flanged 150# ports, thermo, dry mech seal & Teflon packing, 3" tri-clover valve, 150 grit finish, 5HP TEFC screw, 1HP TEFC arm, 5HP TEFC lumpbreaker w/double mech seal and barrier system, Nema 4X SS controls w/VFD's, temp meter, 230 volt, 3 phase, 60 Hz input (Loose). STOCK

Request Quote

RECON V-10
Vertical Cone Screw Blender Vacuum Dryer Dry Blender Vertical Blender
72153 Vacuum/20psig/350f, SS-304 wetted parts, Viton, dished head, 18" Hinged Manway, one (1) 4" 150# and one (1) 2" 150# ports, 100psig/350f ASME STAMPED dimpled jacket w/ 1-1/2" flanged 150# ports, dry mech seal & Teflon packing, 3" NPT manual outlet valve, 150 grit finish, 5HP XP screw, 1HP XP arm. 4-WEEKS

Request Quote

NEW 42N-1
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3/4 hp, TEFC motor, SS-304, atmospheric, center discharge, 36" off floor, Teflon Braided Square Packing, Silicone Gasket, 60-grit Ext, 60-grit Interior, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 2" DUST TIGHT KNIFE GATE VALVE. (Ribbon!) STOCK

Request Quote

NEW 42N-1
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3/4 hp, TEFC motor, SS-304, atmospheric, center discharge, 36" off floor, Teflon Braided Square Packing, Silicone Gasket, 60-grit Ext, 60-grit Interior, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 2" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-1S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3/4 hp, TEFC motor, SS-316, Sanitary Design, atmospheric, center discharge, 36" off floor, Teflon Braided Square Packing, Silicone Gasket, 150-grit Ext, 150-grit Interior, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 2" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-5
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3 HP, TEFC motor, SS-304, atmospheric, center discharge 36" off floor on legs, Single Cover with Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 60-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. - 3" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-5S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Single Cover with Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. - 3" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-5SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, neoprene cover gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) (ADD ALL SS VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-5SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gaskett, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz.(ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-5SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (3" DUST TIGHT KNIFE GATE VALVE W/MANUAL HANDWHEEL). STOCK

Request Quote

NEW 42N-10
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 5 HP, TEFC motor, SS-304, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE W/MANUAL HANDWHEEL). STOCK

Request Quote

NEW 42N-10S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 5 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-10SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 5 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-10SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 5 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) 4" DUST TIGHT KNIFE GATE VALVE STOCK

Request Quote

NEW 42N-18
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 7.5 HP, TEFC motor, SS-304, atmospheric, 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 60-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 4" DUST TIGHT KNIFE GATE VALVE STOCK

Request Quote

NEW 42N-18S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 7.5 HP, TEFC motor, SS-316, Sanitary Design, 4" DUST TIGHT KNIFE GATE VALVE, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, neoprene cover gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). STOCK

Request Quote

NEW 42N-18S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 7.5 HP, TEFC motor, SS-316, Sanitary Design, 4" DUST TIGHT KNIFE GATE VALVE, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). STOCK

Request Quote

NEW 42N-18SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 7.5 HP, TEFC motor, SS-316, Sanitary Design, ALL STAINLESS STEEL, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, , Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-25
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 10 HP, TEFC motor, SS-304, atmospheric, 4" Dust Tight Knife Gate Valve Center Discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 80-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) STOCK

Request Quote

NEW 42N-25S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) STOCK

Request Quote

NEW 42N-25SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-25SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-25SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) STOCK

Request Quote

NEW 42N-36
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 15 HP, TEFC motor, s/s 304, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, all SS 60-grit, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) with 6" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-36S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 15 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. with 6" DUST TIGHT KNIFE GATE VALVE. STOCK

Request Quote

NEW 42N-36SS
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 15 HP, TEFC motor, SS-316, ALL STAINLESS STEEL, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish Int, 80-grit Ext, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). STOCK

Request Quote

NEW 42N-52
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 20 hp, TEFC motor, s/s 304, center discharge 36" clearance off floor, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, all SS 80-grit, 230/460 volt, 3 phase, 60 Hz. 8" Dust Tight Knife Gate Valve. STOCK

Request Quote

NEW 42N-52S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 20 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) STOCK

Request Quote

NEW 42N-52S
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* 20 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, neoprene cover gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) 8" Dust Tight Knife Gate Valve. STOCK

Request Quote

NEW 42B-1
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 1/2 HP, TEFC motor, SS-304, atmospheric, 99rpm, center discharge 36" off floor, Teflon Braided Square Packing, 1-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 2" KNIFE GATE VALVE (4) AUG '19

Request Quote

NEW 42B-5
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 1-1/2 HP, TEFC motor, SS-304, atmospheric, 70rpm, center discharge 36" off floor, Teflon Braided Square Packing, 1-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 3" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-5
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 1-1/2 HP, TEFC motor, SS-304, atmospheric, 70rpm, center discharge 36" off floor, Teflon Braided Square Packing, 1-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 3" KNIFE GATE VALVE (4) AUG '19

Request Quote

NEW 42B-10
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 3 HP, TEFC motor, SS-304, atmospheric, 56rpm, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-10
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 3 HP, TEFC motor, SS-304, atmospheric, 56rpm, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE (4) DEC '19

Request Quote

NEW 42B-18
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 5 HP, TEFC motor, (Vertically Mounted Motor), SS-304, 45rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-25
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 7.5 HP, TEFC motor, SS-304, 43rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-25
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 7.5 HP, TEFC motor, SS-304, 43rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-36
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 10 HP, TEFC motor, SS-304, 40rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 6" KNIFE GATE VALVE STOCK

Request Quote

NEW 42B-36
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
* "B DESIGN" 10 HP, TEFC motor, SS-304, 40rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 6" KNIFE GATE VALVE STOCK

Request Quote

RECON 42N-10
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
100730 7.5 HP, XP motor and Limit Switches, SS-304, Atmospheric, center discharge 36" off floor on legs w/cross brace (old style), 4" Knife Gate Assembly (Old Style, not dust tight), Two-Piece Cover (Piano Hinge) with XP Safety Limit Switch, Teflon Braided Square Packing, SS-304 Split Stuffing Boxes, Silicone Gasket, Shaft Guards, all SS 80-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. Nema-12 Panel Start/Stop/Motor Starter w/Disconnect 3/60/230v. 2-3 WEEKS

Request Quote

RECON CVD-007
Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender
100757 Cylindrical Vacuum Dryer, 7.5 cubic foot working, 9.6 cubic full holding, SS-304, 50psig @ 500F CS jacket, 3" roto-disc valve, thermo, 2 - 6" tri-clover port, 2 - 1"-150# couplings, Alum split stuffing boxes, 7.5HP XP INV Duty 10:1, 43rpm out, Paddle and Ribbon center discharge agitators, hollow shaft w/rotary union, 150-grit int, 2" fibreglass insulation, blast finish ext, Nema 4 VFD. (Filter Housing $21680) **** STOCK

Request Quote

NEW VCB-1
V Cone Blender Tumble Blender Dry Powder Blender
114849 1CF, V-CONE BLENDER, 2HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 36RPM, PAINTED STEEL SUPPORT, 4" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) TBD

Request Quote

NEW VCB-1
V Cone Blender Tumble Blender Dry Powder Blender
114861 1CF, V-CONE BLENDER, 2HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 36RPM, 2HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 4" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) STOCK

Request Quote

NEW VCB-1
V Cone Blender Tumble Blender Dry Powder Blender
114862 1CF, V-CONE BLENDER, 2HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 36RPM, 2HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 4" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) STOCK

Request Quote

NEW VCB-5
V Cone Blender Tumble Blender Dry Powder Blender
114850 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) 2-WEEKS

Request Quote

NEW VCB-5
V Cone Blender Tumble Blender Dry Powder Blender
114851 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) 2-WEEKS

Request Quote

NEW VCB-5
V Cone Blender Tumble Blender Dry Powder Blender
114866 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, 3HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) STOCK

Request Quote

NEW VCB-5
V Cone Blender Tumble Blender Dry Powder Blender
114867 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, 3HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) STOCK

Request Quote

NEW DCB-5
Double Cone Blender Tumble Blender Dry Powder Blender
114868 5CF, DOUBLE CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 20RPM, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) 2-WEEKS

Request Quote

RECON DCB-10
V Cone Blender Tumble Blender Dry Powder Blender
114384 10CF/283.2-Liter, DOUBLE CONE BLENDER, 7.5HP XP, ATMOSPHERIC, SS-304, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 20RPM, INTENSIFIER/SPRAY BAR AND 5HP XP MOTOR DRIVE WITH MAGNETIC SEALS, PAINTED STEEL SUPPORT, 8" BUTTERFLY VALVE, 36" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230V, NEMA 12 CONTROL PANEL TOUCH-SCREEN, E-STOP, DISCONNECT, NEMA 7/9 XP OPERATOR PANEL WITH START/STOP/POT/JOG/ESTOP. (125#/Cu.Ft.) STOCK

Request Quote

RECON TE.3-50
Turboemulsifier Counter Rotating Mixer
67556 Sanitary specs, vacuum pump, heater/chiller, self contained, raise/Lower, Vac Pump on/off, 2 inverters, other controls are not included, call for specs. (2) Vfd's STOCK

Request Quote

NEW HSM-100LSK-I
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab
HSM-100LSK-I with VFD design, 3/4HP, 1/60/115v 20amps, 500-10,000rpm, HSM. (Available options: HSD, Micro, In-Line, Quad, DT Prop, Various Stators, Bushings, HSD blades, Props, Beaker Clamp, Vessels.) 1-2 DAYS

Request Quote

NEW HSM-100LCIT
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab
* SS-316 Wetted Parts, 1HP Drive, Nema 12 IEC Motor, 115 volts, 1Ph, 50/60Hz, 20amps. (option for 1/50/60/190 or 230v). Variable Speed 500-10,000rpm (speed calibration to +/-1%), Constant Torque. TOUCH SCREEN CONTROL with Start/Stop, Speed, Time, Digital Display for Speed Display, Temperature Display (0-300F or 0-150C, RTD Temp Probe is an option), Batch Timer Display and Percent of Load Display, Calibration Screens for Temp and Speed. Raise/Lower Lift Push-Buttons, Calibration, Timer and other Function Controls. With SS-316 M/E Assembly, Disintegrating, Slotted & Fine Screen Heads, Teflon Bushing. Options: Disperser, Micro, Inline, Quad, Temp Probe and Beaker Clamp are available. STOCK

Request Quote

NEW HSM100LH-1
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
1HP High Shear Rotor/Stator Mixer, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 1-3/8" Dia ME operating at 10,000rpm, Slotted Head, Teflon Bushing, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: Other Stators and Bushings, VFD, Bench, Interchangeable Disperser and In-Line (Same as 400DL). In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. 1 WEEK

Request Quote

NEW HSM100LH-2
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
2HP High Shear Rotor/Stator Mixer, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 2" Dia ME operating at 6900rpm, Slotted Head, Teflon Bushing, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: Other Stators and Bushings, VFD, Bench, Interchangeable Disperser and In-Line. In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. 1 WEEK

Request Quote

NEW HSM100LH-2
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
2HP High Shear Rotor/Stator Mixer, AIR/OIL HYD LIFT, Table/Bench Mount Design, Disperseer Assemmbly with 3" Blade operating at 6900rpm, Shaft Guard, XP Limit Switches, Adj Can Lock, Inverter Duty 10:1 TEFC Motor, Nema 1 208/230 VAC/3 PH 60HZVFD (loose). V-belt drive, start, stop spd control w/dig readout. VFD mounted & wired. 1 WEEK

Request Quote

NEW HSM-101
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. STOCK

Request Quote

NEW HSM-105
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. STOCK

Request Quote

NEW HSM-110
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. STOCK

Request Quote

NEW HSM400DLA
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer
Basic Design. (Model 1), 1HP TEFC 3/60/230/460v VFD Capable Motor, Single Mech Seal 45psig, Viton, SS-316/80-grit, Slotted Head. Carbon Steel Painted. Add Bench, Controls, etc as required. 1-2 WEEKS

Request Quote

NEW HSM400DLA
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer
Enclosed Design, Carbon Steel Painted Base, Riser and Bench, 1HP TEFC VFD rated Motor 3/60/230/460v, 10,000rpm, Double Mechanical Seal (Kalrez) 250psig w/ Barrier Tank, Viton Orings, Slotted, Fine Screen & Disentigrating Stators, NPT Inlet and Outlet, 1HP Nema 12 VFD 3/60/230v. Leveling Pads. Mix Chamber Pressure Gauge, Inlet and Outlet Valves. Choose from many options on price sheet. 1-2 WEEKS

Request Quote

NEW HSM-401
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer
1.5HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. STOCK

Request Quote

NEW HSM-405
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer
5HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. STOCK

Request Quote

NEW HSM-410
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer
10HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. STOCK

Request Quote

RECON HSM-100LCI-T
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab
210938 TOUCH SCREEN CONTROL, 1HP Drive, 1/60/115v, 500-10,000rpm +/-1% w/calibration. Speed, Load, Temp, Timer displays, 15" lift, 16" under blade R/L push buttons. HSM, Data Aq. STOCK

Request Quote

RECON HSM-100LCI-T
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab
211506 TOUCH SCREEN CONTROL, 1HP Drive, 1/60/115v, 500-10,000rpm +/-1% w/calibration. Speed, Load, Temp, Timer displays, 15" lift, 16" under blade R/L push buttons. HSM. Beaker Clamp, DT. STOCK

Request Quote

RECON HSM-101
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
213728 T-316 wetted parts, 1.5HP XP, 50/60 Hz motors, Slotted Stator Head, Teflon. STOCK

Request Quote

RECON HSM-105
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
209948 SS-316 wetted parts, 5HP XP, 440C slotted & large square stator heads & stellite tipped rotor, SLIM, Stellite Bushing. STOCK

Request Quote

RECON HSM-105
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
215289 SS-316 wetted parts, 5HP XP, slotted stator head, Glass Filled Teflon Bushing. STOCK

Request Quote

RECON HSM-110
Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
215152 Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. STOCK

Request Quote

RECON HSM-400DLA
Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer
112673 Std 400DLA. Single Mech Seal, CS Flat Base, Leveling Pads, 1HP TEFC VFD rated Motor 3/60/230/460v, 10,000rpm, Single Mechanical Seal 45psig w/Viton, Viton Chamber orings, SS-316, 80-grit, Slotted Stator, NPT Inlet (3/4") & Outlet (3/8"). STOCK

Request Quote

RECON HSM-400DLA
Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer
213781 Std 400DLA. Single Mech Seal, CS Flat Base, Leveling Pads, 1HP XP VFD rated Motor 3/60/230/460v, 10,000rpm, Single Mechanical Seal 125psig w/Kalrez, Kalrez Chamber orings, SS-316, 80-grit, Slotted Stator, NPT Inlet (3/4") & Outlet (3/8"), Nema 4X, 3/60/230v, 1HP VFD loose. STOCK

Request Quote

RECON HSM-400DLA
Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer
206993 Std 400DLA. Single Mech Seal, CS Flat Base, Leveling Pads, 1HP XP, VFD rated Motor 3/60/230/460v, 10,000rpm, Single Mechanical Seal 125psig w/Viton, Viton Chamber orings, SS-316, 80-grit, Slotted Stator, Tri-Clover Inlet & Outlet (2"). 1-Week

Request Quote

RECON HSM-401
Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer
214796 XP, 1.5HP, 3/60/230/460V, slotted head, Viton, single seal. NPT. STOCK

Request Quote

RECON HSM-501
Vacuum Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
66803 slotted head, 1-1/2HP XP 230/460, 3/60Hz, bronze bushing, single or double mech seal. Hanging Bracket.**** STOCK

Request Quote

RECON HSM-510
Vacuum Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
200224 10HP, slotted head, Bronze bushing, with single mechanical seal for vacuum application. **** STOCK

Request Quote

RECON PM-120
PreMax Ultra High Shear Batch Mixer Rotor Stator Homogenizer Batch
208553 20HP XP, Standard Design, 3" Delta V Rotor/Stator, Air/Oil Hydraulic Lift, Floor Mounted Base Plate with matching 15-gal mix vessel w/jacket, cart, casters. 1-Week

Request Quote

RECON HSM-703X-20
Ultra High Shear Mixer Inline Mixer Rotor Stator Mixer Emulsifier Homogenizer X Series Quad Slot Mega Shear Colloid Mill
201434 20 HP XP, special 3" dia. X-5 rotor/stator, 150 psig mix chamber, standard machine finish, SS work area, c/s shroud, NPT inlet/outlet, double mechanical seal w/barrier tank & controls, Viton. With Nema 1, 460v, 20HP VFD mounted & wired. STOCK

Request Quote

RECON HSM-706X-30
Ultra High Shear Mixer Inline Mixer Rotor Stator Mixer Emulsifier Homogenizer X Series Quad Slot Mega Shear Colloid Mill
214260 30HP XP, 6" dia X-5, 7200rpm, X-Series rotor/stator, T316/Viton/150-grit, 150psig @ 250f mix chamber, Double Mechanical Cartridge Seal w/barrier tank, Oil Pump for bearing system, 1-1/2" 150# inlet, 1-1/2" 150# outlet, CS base & enclosure. Three (3) gap shims .045", .060" & .075". Nema-4X, 30HP 480v VFD (loose). STOCK

Request Quote

NEW HSM-400SC-5
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM
Modified HSM-400 Lab Size Design, Sanitary, Horizontal, 5HP TEFC, double-mechanical seal and barrier tank, viton, SS-316, 80grit, 1" tri-clamp inlet & outlet with IN-LINE SLIM (I-SLIM) w/Hose & Wand, one-piece inlet/stator-slotted head. CS Flat Base, CS Tube Riser with Leveling Pads. Nema 1 VFD 3/60/230v, mounted and wired. Carbon Steel Painted Drive Base, Flat Base and Tube Riser. No drive enclosure. 2-3 WEEKS

Request Quote

NEW HSM-405SC-25
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM
303956 Modified HSM-405 design, Sanitary, Horizontal, 25HP XP, Viton, double-mechanical seal and barrier tank, viton, SS-316, 150grit, Wing Nuts, One 2" TC Inlet and one 2" tri-clamp outlet with IN-LINE SLIM (I-SLIM) 1-1/2" SLIM Port, w/hopper, one-piece inlet/stator-large square head. SS 2-cuft Hopper for powder loading, SS portable cart with casters. ADD CONTROLS. STOCK

Request Quote

RECON HSM-420SC
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM
106885 In-Line SLIM, Sanitary, Horizontal, 20HP XP, double-mechanical seal and barrier tank, viton, SS-316, 150grit, 2.5" tri-clamp inlet & outlet with IN-LINE SLIM (I-SLIM) w/hopper, inlet/stator-large square head. SS Hopper for powder loading, SS portable cart with casters. N1 VFD 3/60/460v, mounted and wired. STOCK

Request Quote

RECON HSM-412SB-150
Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM
67295 Modified ME-450XS, 150HP TEFC Motor, double-mechanical seal and barrier tank, 9" Rotor/Stator viton, SS-316, 150grit, Voss tri-clamp, 4" tri-clamp inlet & 3" Tri-clamp outlet with IN-LINE SLIM (I-SLIM) 3" and 3" ball valve, hose & wand, slotted head. **** STOCK

Request Quote

NEW HSM100LH-1
Batch High shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
* 1HP High Speed Disperser, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 2" Disperser Blade operating at 10,000rpm, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: VFD, Bench, Interchangeable ME (Same as LC) and In-Line (Same as 400DL). In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. 1 WEEK

Request Quote

NEW HSM100LH-2
Batch High shear Mixer Rotor Stator Mixer Emulsifier Homogenizer
* 2HP XP High Speed Disperser, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 3.5" Disperser Blade operating at 5700rpm, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: VFD, Bench, Interchangeable ME and In-Line. In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. 1 WEEK

Request Quote

NEW HSD-5
High Speed Disperser Batch
* 5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 6" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $392 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-7.5
High Speed Disperser Batch
* 7.5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 8" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $484 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-10
High Speed Disperser Batch
* 10hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 10" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $571 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-15
High Speed Disperser Batch
* 15hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 12" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $698 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-20
High Speed Disperser Batch
* 20hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 14" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $715 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-25
High Speed Disperser Batch
* 25hp High Speed Disperser, Lift Mounted on floor w/54" Rise, 16" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $760 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-30
High Speed Disperser Batch
* 30hp High Speed Disperser, Lift Mounted on floor w/54" Rise, 16" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $825 for XP motor) 1-2 WEEKS

Request Quote

NEW HSD-50
High Speed Disperser Batch
* 50hp High Speed Disperser, Lift Mounted on floor w/66" Rise, 18" Blade @ 12" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $1049 for XP motor) 1-2 WEEKS

Request Quote

RECON HSD-5
High Speed Disperser Batch
111663 5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 8" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. TBD

Request Quote

RECON HSD-7.5
High Speed Disperser Batch
215202 7.5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 8" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, XP Motor. XP S/S/POT Station. Nema-4X 7.5HP VFD 3/60/460v. STOCK

Request Quote

RECON HSD-10
High Speed Disperser Batch
215001 10hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 10" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty TEFC Motor. STOCK

Request Quote

RECON HSD-20
High Speed Disperser Batch
213644 20hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 15" Blade (125-1250rpm) @ 11" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. Carbon Steel base with Fork Channel design for lifting (RD2224). STOCK

Request Quote

RECON HSD-25
High Speed Disperser Batch
210071 25HP TEFC High Speed Disperser, Lift Mounted on floor w/54" Rise, 16" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. 1-WEEK

Request Quote

NEW PBA-2
Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade
2HP TEFC, AIR/OIL, SS-304, 80-GRIT, TABLE MOUNT DESIGN, MOUNTED ON BENCH, 36-540RPM (6-90Hz), 6" 3-WING BOW-TIE BLADE (OTHER SIZES/TYPES AVAILABLE), 4" COLOR TOUCH SCREEN MOUNTED ON FRONT OF BONNET, NEMA-1 3/60/230V VFD MOUNTED INSIDE OF BONNET. 3-4 WEEKS

Request Quote

NEW PBA-10
Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade
10HP XP, AIR/OIL, SS-304, 80-GRIT, FLOOR MOUNT DESIGN, 44-175RPM, 18", 20", 22" 3-WING BOW-TIE BLADE, (OTHER SIZES/TYPES AVAILABLE). 3-4 WEEKS

Request Quote

RECON PBA-2
Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade
214530 2HP TEFC, AIR/OIL, SS-304, 80-GRIT, TABLE MOUNT DESIGN, MOUNTED ON BENCH, 36-540RPM (6-90Hz), 8" 3-WING BOW-TIE BLADE, NEMA-4X 3/60/230V VFD. STOCK

Request Quote

RECON PBA-5
Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade
113173 5HP XP, AIR/OIL, SS-304, 80-GRIT, FLOOR MOUNT DESIGN, 9-88RPM, 20" DIA 3-WING BOW-TIE BLADE W/RISERS, DESIGNED FOR 55-GAL DRUM MIXING, CAN BE USED FOR OTHER SIZE VESSELS (OTHER SIZES/TYPES AVAILABLE). ADD VFD AND XP CONTROLS AS REQUIRED. 1-WEEK

Request Quote