Browse New, Used, and Rebuilt Inventory in Stock
| Condition | Model | S/N | Description | Delivery |
|---|---|---|---|---|
| NEW | DPM-1QT Double Planetary Mixer Batch Change Can |
Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 Flexi-Lip Sealed Gearbox and HV Blades, 150-Grit, 2-2" S&G Ports, Viton, Can-Hood Clamps, 50psig Vac Internally Machined Mix Can with Thermo, Bench w/level mounts. Can-Hood Clamps. Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with start/stop, speed control, displays for speed, load, temp and cycle timer, speed and temperature calibration, E-Stop, Fused Rotary Disconnect. | 8-10 WEEKS | |
| NEW | DPM-2 Double Planetary Mixer Batch Change Can |
1.5HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Tefloflex, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 100 psig ss jacket, Int-Mach, Thermo, 1" Ball Valve, Casters, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. | 8-10 WEEKS | |
| NEW | DPM-2 Double Planetary Mixer Batch Change Can |
1.5HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 50 psig ss jacket, Int-Mach, Thermo, 1" Ball Valve, Casters, Air/Oil Lift w/two-hand controls. Bench w/leveling pads. NO CONTROLS. | 8-10 WEEKS | |
| NEW | DPM-4 Double Planetary Mixer Batch Change Can |
2HP, XP 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 50 psig ss jacket, Thermo, 1"TC Ball Valve, Caster, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. | 8-10 WEEKS | |
| RECON | DPM-1QT Double Planetary Mixer Batch Change Can |
203410 | Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 R1-Style Sealed Gearbox and Rect Blades, Scrapers, 150-Grit, 2-2" S&G Ports, Viton, Mix Can (No Jacket, No Outlet). Bench w/casters. Vac pump mounted and wired, Nema 1 VFD, 1/60/115V/230v. | 3 WEEKS |
| RECON | DPM-1QT Double Planetary Mixer Batch Change Can |
213723 | Air/Oil Reverse Hydraulic Lift, 1/2HP XP, Vac, SS-316 Flexi-Lip Sealed Gearbox and HV Blades, Side/Bottom Scrapers, 150-Grit, 2-2" S&G Ports, Viton, Can-Hood Clamps, 50psig Vac Internally Machined Mix Can with Casters and Thermo. Bench w/casters. Can-Hood Clamps. Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with start/stop, speed control, displays for speed, load, temp and cycle timer, speed and temperature calibration, E-Stop, Fused Rotary Disconnect. Vacuum Pump, 3/4HP, 3/60/230v installed on lower bench, plumbed with filter and valves, starter in panel. | STOCK |
| RECON | DPM-2 Double Planetary Mixer Batch Change Can |
212614 | 1.5HP, TEFC 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 100 psig ss jacket, Int Mach, Thermo, 1" Cove Plug, Casters, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. (See Vac Pump 103939VAC) | 1 - 2 WEEKS |
| RECON | DPM-2 Double Planetary Mixer Batch Change Can |
210108 | 1.5HP, TEFC 3/60/230 volt, inverter-drive, T316, 80-grit, vacuum, HV Blades, Viton, Sealed Flexi-Lip Gearbox, 2-3" ports, hood-can clamps, 100 psig ss jacket, RTD Thermo, 1" Tri-Clover BV, Casters, Air/Oil Lift w/two-hand controls, Nema 12 Control Panel, 3/60/230v, 4" Color Touch Screen with Speed, Load, Time & Temp Displays, E-Stop, Disconnect, mounted and wired, Bench w/leveling pads. | 3 WEEKS |
| NEW | DPM-40 Double Planetary Mixer Batch Change Can |
Air/Oil Hydraulic Lift, 15HP TEFC Mechanical Vari-drive, Vacuum, T316 80-grit Int, Blast Ext, HV Stirrer blades, two-3" TC S&C ports, one 1"NPT port, Viton, Sealed Cast Iron Gearbox (painted), Can-Hood Clamps, T316, Mix Can, Vacuum, DS-Rated, 80-grit, 25 psig SS jacket, RTD Thermo, 2" FBBV, Casters. Controls to be added (will add 2-4+ weeks to lead time). | TBD | |
| RECON | HDM-200 Double Planetary Mixer Batch Change Can |
Air/oil hydraulic lift, 40HP XP, Vari-drive, T304, 80-grit, Viton, Vacuum 29.5"Hg, Dust Shield, Rect-Stirrer blades, Mech Shaft Seals. Sidewall Scraper. One 1" NPT, Two 3" S&G ports, One 6" S&G Port, Cast Iron Gearbox, Mix Can 200-gallon, SS-304, 80-grit, 50 psig CS Jacket, Trunions, 2" FBBV. | 18-20 WEEKS | |
| RECON | HDM-200 Double Planetary Mixer Batch Change Can |
21933 | Air/oil hydraulic lift, 40HP XP, Vari-drive, T304, 80-grit, Viton, NON-Vacuum, Dust Shield, Rect-Stirrer blades, Mech Shaft Seals. Sidewall Scraper. One 1" NPT, Two 3" S&G ports, One 6" S&G Port, Cast Iron Gearbox, Mix Can 200-gallon, SS-304, 80-grit, 50 psig CS Jacket, Trunions, 2" FBBV. | 18-20 WEEKS |
| NEW | PDM-2 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
Air/oil Reverse Lift, SS-304, Vac, 80grit, Viton, SS sealed gearbox w/Kalrez seal orings, three (3) 3" TC S&G ports w/Metaglass, two (2) 1/2" NPT ports, Hood to Bonnet QD Clamps, 1HP XP planetary, 1.5 HP XP disperser w/3" HSD Blade. Side & Bottom Scrapers. Mix Can, Vac, 50psig SS Jacket, I/M, Thermo, 1-1/4" Cove Plug Valve, Casters, Can-Hood Clamps. | 8-10 WEEKS | |
| NEW | PDDM-2 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
217912 | Air/oil Reverse Lift, SS-316, Vac, 80grit, Viton, SS sealed gearbox w/Viton orings, three (3) 3" S&G ports, one (1) 1/2" NPT ports, Hood to Bonnet QD Clamps, 1.5HP XP planetary w/Rectangular Blades, 3 HP XP disperser w/2-1/4" HSD Blade. Side & Bottom Scrapers. Mix Can, Vac, 50psig SS Jacket, I/M, Thermo, 1-1/4" Cove Plug Valve, Casters, Can-Hood Clamps. Bench w/Level Mounts. (NO CONTROLS) | 8-10 WEEKS |
| NEW | PDM-40 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
Air/Oil lift, Vacuum, SS-316, Viton, 80 grit, STD Carbon Steel Gearbox w/caps and Viton gaskets, 7.5HP XP Stirrer, 15HP XP Disperser, 1 - 1" NPT plus 2-3" S&G ports, Mix Can, 2" FBBV, Casters, 50psig SS jacket, RTD thermo. Controls to be added (will add 2-4+ weeks to lead time). | TBD | |
| NEW | PDDM-10 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
117635 | Air/Oil lift, Vacuum, SS-304, Silicone/TES, 150/80-grit, Stainless-Steel Sealed Gearbox, 5HP XP HV Stirrers (2), 15HP XP Disperser with 4-1/2" HSD Blades (2), one (1) 6" TC port, one (1) 1" NPT plus 2-3" TC S&G ports w/Metaglass, Mix Can, 2" FBBV TC, Casters, 50psig SS jacket, "J" thermo, internally machined. Controls to be added (will add 4+ weeks to lead time). | STOCK |
| RECON | PDDM-2 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
208883 | Air/Oil Reverse Lift, SS-316, Vac, 80grit, viton, SS sealed gearbox, two (2) 3" CB S&G ports, one (1) 1/4" injection port, one (1) 1/2" vac/exhaust ports, Side & Bottom Scrapers, two (2) HV Blades, two (2) disperser shafts with 2.25" HSD Blades, Can-Hood Clamps, 2HP XP planetary, 2HP XP disperser, one (1) Mix Can, T304, 50psig SS Jacket, Thermo (RTD), Int Mach, 1-1/4" Cove Plug, casters. Vac Pump. Nema 12 Control panel 3/60/230v, 10" Color Touch Screen, VFD's, Start/Stop/Speed, Temp, Cycle Timer, Speed/Temp Calibration. Estop, Disconnect, Vac Pump S/S. Bench w/Casters. | 1 WEEK |
| RECON | PDDM-4 Power Mix Planetary Disperser Planetary Mixer Batch Change Can |
107895 | Air/Oil Reverse Lift, SS-316, Vac, 80grit, viton, SS sealed gearbox, 3-3" TC ports w/Metaglas, 2- 1/2" TC port connections, 2-1/2" NPT port connections positionaed at a 45 degree angle, SS quick release clamps to secure vac hood to upper bonnet, Side & Bottom Scrapers, two (2) HV Blades, two (2) disperser shafts with 3" HSD Blades 6-6,000rpm, Can-Hood Clamps, 2HP XP planetary, 5HP XP disperser, 50psig ASME Code Stamped SS Jacket, 50psig Internal pressure, Thermo (J), 1/2" TC Ball valve bottom center, casters. Mounted Nema 12 Control panel 3/60/230v, 6" Color Touch Screen, VFD's, Start/Stop/Speed, Temp, Cycle Timer, Speed/Temp Calibration. Estop, Disconnect, Bench w/Level mounts. Mounted and plumped vac pump 3/60/230V. Additional ASME cans available. | 2 -3 WEEKS |
| NEW | VMC-2 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
218718 | Air/Oil Reverse Hydraulic Lift, Vac, SS316, 150grit int, 80-grit ext, Viton, two-2" S&G & one 1/2" NPT, 1/2 HP XP 3-Wing Anchor, Fixed Scrapers, Dry Running Double FlexiLip FDA MF Teflon shaft seals, can-cover clamps, 1 HP XP M/E, 1 HP XP Disp, 10:1 speed ranges. 50psig, 1" BV w/TC outlet, Int Mach, casters. Bench w/level mounts. NO CONTROLS | 8-10 WEEKS |
| NEW | VMC-10 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
SS-316, 80-grit int, 80-grit ext, Vacuum, XP Motors, 2-3" S&G ports, 1-1" NPT port, RTD Thermowell, Viton, 50 psig CS jacket, 2" FBBV, Casters, 80 grit, 3HP anchor w/scrapers, 5HP ME/SLIM bushingless w/Large Sq Hole Stator, 5HP disperser w/4-1/2" blade. | 8-10 WEEKS | |
| NEW | VMC-40 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
117266 | STD, Air/oil Lift, SS-316, 80-grit int, 80-grit ext, Vacuum, Mechanical Seals, Teflon/TES/Kalrez, XP Motors, 2-3" TC S&G ports w/Metaglass, 2-1-1/2" TC ports, RTD Thermowell, 4-Clamps. One (1) Mix Can, T316, 50 psig SS jacket, 2" FBBV-TC, Casters, 80 grit. 5HP XP Three-Wing Anchor w/Scrapers (80rpm), 5HP XP ME/SLIM (1.5" TC) bushingless w/Large Sq Hole Stator (3600rpm), 7.5HP XP Disperser w/6" blade @ 2550rpm (4000fpm). NO CONTROLS> XP 7/9 Junction Box (Motors & L/S), Nema-4 I/S Junction box (Thermo). | STOCK |
| RECON | VMC-2 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
218432 | Air/Oil Reverse Hydraulic Lift, Vac, SS316, 150grit int, 80-grit ext, Viton, two-2" S&G & one 1/2" NPT, Thermoprobe/well 1/2 HP XP 3-Wing Anchor, Fixed Scrapers, Dry Running Double FlexiLip FDA MF Teflon shaft seals, can-cover clamps, 1 HP XP M/E w/ Teflon & Slotted Head, 1 HP XP Disp, 10:1 speed ranges. Mix Can, 50psig, 1" BV w/TC outlet, Int Mach, casters. Bench w/level mounts. Control Panel, Nema-12. 3/60/230v, 7" Color Touch Screen, disconnect, e-stop, mounted/wired. | STOCK |
| RECON | PVM-10 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
68185 | Air/Oil, SS-304, Vacuum and +5psig, 80-grit Int, 80-grit Ext, Viton, one (1) 3" Hinged S&G port, one (1) 3" S&G port, one (1) 1" NPT port, Thermowell (J), 3HP XP Anchor w/Hinged Teflon Scrapers, 5HP XP 4.5" HSD, 1.5HP XP ME, Mix Can, Vac, T304, 80-grit, 2" NPT Ball Valve (3.5" off the floor), 50psig SS Jacket, Can-Cover Clamps, Casters. Mix Can, Vac, T304, 80-grit, 2" NPT Ball Valve (3.5" off the floor), 50psig SS Jacket, Can-Cover Clamps, Casters. (Mech Seals). Three (3) VFD's, 460v, 4X. | 3-WEEKS |
| RECON | VMC-10S Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch hsd. All Stainless Steel Ext. |
110666 | DUAL SHAFT. All Stainless Steel Base, Bonnet, Enclosure w/Bellows. Air/Oil, SS-316, Vacuum, 150-grit Int, 80-grit Ext, Viton, two (2) 3" S&G TC ports w/Metaglass, one (1) 1/2" NPT port, Thermowell XP (RTD), 3HP XP Anchor (12-112rpm) w/Hinged Teflon Scrapers, 5HP XP 4.5" HSD Blade (430-4300rpm), Mix Can, Vac, T316, 150-grit, 2" TC Ball Valve, Casters, 50psig SS Jacket. Control panel, Nema-7/9, Start/Stop PB's, Speed Pot's, Speed Dispaly and Load Display, for each drive, E-Stop, I/S Barier for Temp, Nema-12 Panel with 5HP & 3HP VFD's, disconnect, 3/60/480v. | 3-4 WEEKS |
| RECON | VMC-10 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
108611 | DUAL SHAFT. Air/Oil, SS-304, Vacuum, 80-grit Int, 80-grit Ext, Viton, two (2) 3" S&G ports, one (1) 1" NPT port, Thermowell (J), 3HP TEFC Anchor (12-112rpm) w/Hinged Teflon Scrapers, 2HP TEFC 3" Propeller (100-1000rpm), Mix Can, Vac, T304, 80-grit, 2" NPT Ball Valve, Casters (no jacket). Control panel, Nema-12, 3/60/230V, Start/Stop PB's and Speed Pot for each drive, 6" Color Touch Screen with displays for speed, load, temp, recipe system, Data Aq, AB PLC, E-Stop, Disconnect, 2HP & 3HP VFD's. | STOCK |
| RECON | VMC-40 Versa Mix Multi Shaft Mixer Anchor Agitator Change Can Batch Homogenizer |
115392 | SS-316, 80-grit int, 80-grit ext, Vacuum, Mechanical Seals, Teflon/TES/Kalrez, XP Motors, 2-3" S&G ports, 2-1-1/2" TC ports, RTD Thermowell, 4-Clamps, 50 psig SS jacket, 2" FBBV-TC, Casters, 80 grit, 5HP anchor w/scrapers, 5HP ME/SLIM bushingless w/Large Sq Hole Stator, 7.5HP disperser w/6" blade. Nema-12 Control Panel, 3/60/480v. E-stop, 10" Touch Screen. Speed/Temp/Timer, VFD's. | 3-WEEKS |
| NEW | CDA-50 Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer |
218738 | SS-316/150, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 1-6" TC port w/ SS cap, 50 psig cs jckt, 2" Ball Valve, Casters, FlexiLip seals, Viton, 7" Disp blade w/10HP XP motor, 2-Wing Anchor (hinged scrapers) w/5HP XP motor, 3/60/230/460v. (TA) Select required controls. | 14 WEEKS |
| NEW | CDA-100 Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer |
SS-304/80, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 50 psig cs jckt, 2" Ball Valve w/6" clearance, Casters, FlexiLip seals, Viton, 8" Disp blade w/15HP TEFC motor, 2-Wing Anchor w/10HP TEFC motor, 3/60/230/460v. Select required controls. UPGRADE TO T316/150-GRIT AVAILABLE. | 4-8 WEEKS | |
| NEW | CDA-200 Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer |
218719 | SS-304/80, Vac, change-can, air/oil hyd lift, ss vac cover w/1" FNPT, 2-3" S&G ports, 50 psig cs jckt (1.5"NPT ports), 2" Ball Valve (NPT) w/6" clearance, Casters, 80 grit int, FlexiLip seals, Viton, 12" Disp blade w/20HP TEFC motor, 2-Wing Anchor w/10HP TEFC motor, 3/60/230/460v. Select required controls. | 14 Weeks |
| RECON | CDA-10 Dual Shaft Mixer Anchor Agitator Batch Change Can Paint Mixer |
74379 | SS-316, 80-grit Int, Vac, Viton, change-can, air/oil hyd lift, Vac cover w/two 1" FNPT ports, two 3" S&G ports, 320-Blast Exterior finish. Double Flexi Dry Running shaft seals (MF Teflon), 15 psig cs jckt, 2" Ball Valve (NPT) at 4" off floor, Casters, 80 grit int, 3.5" Disp blade w/5HP XP motor, 2-Wing Anchor w/hinged Scrapers and 3HP XP motor, 3/60/230/460v. Added: 3 & 5Hp VFD's 480v, mounted/wired. | 2-3 WEEKS |
| NEW | Tank, 40-GAL Mix Vessel |
40-Gallon Vessel, T304, Atmospheric design, with flat bottom, open top, casters, (2) T304 handles. 34" ID X 12-3/16" Deep X 19-7/8" OAH. Removable Strainer w/two-handles. No outlet. (Canvas Beauty SN-307206) | STOCK | |
| RECON | TANK, 200-GAL Pressure Vessel Storage Tank |
200-gallon working, 250-gal full, mixing vessel. T316L, 240-grit Int, 180-grit Ext. 40" OD X 40.25" St Side rated for 13psig internal pressure at 212f. Removable dished cover (clamps). ASME 100psig/350f Jacket on sides only. Insulated (2") side/bottom sheathed in stainless steel T304 (welded). 2" MCF Ball Valve w/actuator, bottom center at 5.75" off floor, legs designed for addition of load cells. Two (2) Thermowells, bottom and sidewall. 18" Manway, two (2) 1-1/2"TC port w/Gama Jet VI spray machines, 25gpm@45psi 360-degree, 3" TC w/XP Fibre Optic Light, 3" TC sight glass/port, 2" TC, foru (4) 1" TC, lifting lugs. #D5557 | STOCK | |
| NEW | Tank, 500-GAL Mix Vessel |
500-Gallon Working Volume Mix Vessel, 590-Full Holding, T304, Atmospheric design, Drive Support with open top, F&D Dished bottom, (3) T304 support legs with 6-1/2" Sq x 1/2" Tk mounting pads, (2) T304 lift lugs. 48" ID x 72" St Side Wall x 8" Deep Dished Bottom. Rolled Angle upper rim (2" wide). One (1) 3" 150# ANSI Flange Outlet, center bottom, located at 29-1/2" off the floor. Mill Finish, Internal Welds ground smooth. OAH = 117". (Canvas Beauty SN-307207) | STOCK | |
| NEW | DS-10 Discharge System Press |
117636 | Standard, SS-304 80-grit, 25psig, Viton, 1HP XP, Manual Directional Control Valve. (Add motor starter). | STOCK |
| NEW | DS-40 Discharge System Press |
117501 | Standard, SS-304, 80-grit, 50psig, Viton, 1HP TEFC, Manual Directional Control Valve. One (1) 3" TC port w/Flush Plug. One (1) 1" FNPT port. Nema-12 Motor Starter with On/Off, 3/60/230v, mounted/wired. SPECIAL PLATEN DESIGN WITH LARGER X-SECTION ORING FOR NON-MACHINED, DISCHARGED RATED, MIX CANS. | STOCK |
| NEW | DS-40 Discharge System Press |
Standard, SS-304 80-grit, 25psig, Viton, 1HP XP, Manual Directional Control Valve. (Add motor starter). | TBD | |
| RECON | DS-1QT-SS Discharge System Press |
72571 | DS-1QT-SS, 110psig under platen. Extended height. All Stainles Steel construction, bench and DS bridge sheathed in SS. T304, Viton, 1/2HP TEFC, 1/60/115volt, Nema 4X on/off/starter with Raise/Lower Selector Switch and E-Stop. Foot Pedal controls. Stainless Steel Benchw/leveling pads. Pressure Chart. | STOCK |
| RECON | DS-2 Discharge System Press |
212652 | DS-2 Standard w/Extended use features, 65psig under the platen, 1/4" MNPT Vent on platen w/plug, SS-316, 80-grit finish, Viton, TEFC, 3Ph, 60Hz, 230 volt. With bench, level mounts and Nema 12 on/off starter. Large reservoir and air cooled radiator system for long operating periods. | STOCK |
| RECON | DS-40 Discharge System Press |
57349 | Standard, SS-304 80-grit, 50psig, Viton, 1HP TEFC, Nema-12 3/60/460v Motor Starter, Mounted/Wired. | 2-3 WEEKS |
| RECON | HED-100 Discharge System Press |
112507 | Elevated DS-100, 3/60/460v, 5HP TEFC, 50psig under the Platen, Viton/T304, NPT Vent w/Plug, 36" discharge height. Dual Cylinders for lifting, single cylinder for discharging. Pneumatic Lift Lock w/Limit Switch. Nema-7/9 XP Control Panel with, 5HP motor starter, On/Off, Elevator Raise/Lower Control, Platen Control, Pressure Indicator, E-Stop. Power Unit is supplied for reote installation. | 3-4 WEEKS |
| NEW | TRM 2.5 X 5 Three Roll Mill |
2.5 X 5 Three Roll Mill, 1/2HP XP motor, bench/table top model, XP safety trip switch. Stainless Steel 440c precision ground rolls, cored for water cooling/heating. Adjustable SS Apron, Teflon End plates. Nip Block. Add controls, bench and/or other options. | 6-8 WEEKS | |
| NEW | TRM 4 X 8 Three Roll Mill |
XP motor, floor model, stainless steel 440C rolls, Teflon end plates, NEMA 12 control panel, mounted and wired. | 6-8 WEEKS | |
| NEW | TRM 5 X 12 Three Roll Mill |
XP motor, stainless steel 440C rolls, Teflon end plates. Add controls. | 3-4 WEEKS | |
| NEW | TRM 5 X 12 Three Roll Mill |
XP motor, carbon steel 52100 rolls, Teflon end plates. Add controls. | 3-4 WEEKS | |
| RECON | TRM 2.5 X 5 Three Roll Mill |
217211 | 2.5 X 5 Three Roll Mill, 1/2HP TEFC motor, bench/table top model, XP safety trip switch. Stainless Steel 440c precision ground rolls, cored for water cooling/heating. Adjustable SS Apron, Teflon End plates. Nip Block. Control Panel, Nema-12 2/60/230v 1/2HP, S/S/Pot, E-Stop, Keypad display, disconnect. on/off for wash mode, mounted/wired. | 6-8 WEEKS |
| RECON | TRM 4 X 8 Three Roll Mill |
218038 | 4 X 8 Floor Model, 1HP XP, XP Trip/safety swithces, I/S Nip Block, CS-52100 Hardened Precision Ground Rolls, Rotary Pressure joints, Cooling Manifold, Valves & Collection Trough, SS Apron and Adj Teflon End Plates, Nema 7/9 Control Panel, VFD Keypad, start/stop, speed pot, for/rev, clean mode on/off, E-Stop, E-Brake, 3/60/230V, mounted/wired | 6-WEEKS |
| RECON | KE-15 Kneader Extruder |
38794 | KE-15 CLASS-V, SS-304, 15HP Sigma Blades (Cored), 5HP Extrusion Screw (Cored), 42psig CS Jacket, N12 controls (single speed sigma, variable speed screw) 460V. S/N C11472 | STOCK |
| NEW | 42N-1 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3/4 hp, TEFC motor, SS-304, atmospheric, center discharge, 36" off floor, Teflon Braided Square Packing, Silicone Gasket, 60-grit Ext, 60-grit Interior, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 2" DUST TIGHT KNIFE GATE VALVE. | STOCK | |
| NEW | 42N-1S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3/4 hp, TEFC motor, SS-316, Sanitary Design, atmospheric, center discharge, 36" off floor, Teflon Braided Square Packing, Silicone Gasket, 150-grit Ext, 150-grit Interior, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 2" DUST TIGHT KNIFE GATE VALVE. | STOCK | |
| NEW | 42N-1SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3/4 HP. TEFC motor, T-316, Sanitary design, atmospheric, center discharge, 36" off floor with legs, all stainless steel, teflon braided square packing, 150-grit ext, 1-pc cover, 230/460 volt, 3 phase, 60 Hz (High HP capable) - 2" Dust tight knife gate valve (ROSS NOTE: 4V0080) | (10) TBD | |
| NEW | 42N-5 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3 HP, TEFC motor, SS-304, atmospheric, center discharge 36" off floor on legs, Single Cover with Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 60-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. - 3" DUST TIGHT KNIFE GATE VALVE. | STOCK | |
| NEW | 42N-5S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Single Cover with Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. - 3" DUST TIGHT KNIFE GATE VALVE. | STOCK | |
| NEW | 42N-5SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (3" DUST TIGHT KNIFE GATE VALVE W/MANUAL HANDWHEEL). | STOCK | |
| NEW | 42N-5SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. | STOCK | |
| NEW | 42N-5SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
3 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 1-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, 230/460 volt, 3 phase, 60 Hz. (3" dust tight knife gate valve w/ manual handwheel) (ROSS NOTE: 4V0081) | (6) TBD | |
| NEW | 42N-10 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
5 HP, TEFC motor, SS-304, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE W/MANUAL HANDWHEEL). | STOCK | |
| NEW | 42N-10S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
5 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). | STOCK | |
| NEW | 42N-10SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
5 HP, TEFC motor, SS-316, (New) Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, 2-pc Cover, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) 4" DUST TIGHT KNIFE GATE VALVE | STOCK | |
| NEW | 42N-18 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
7.5 HP, TEFC motor, SS-304, atmospheric, 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 60-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) - 4" DUST TIGHT KNIFE GATE VALVE | STOCK (STORAGE) | |
| NEW | 42N-18S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
7.5 HP, TEFC motor, SS-316, Sanitary Design, 4" DUST TIGHT KNIFE GATE VALVE, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). | STOCK | |
| NEW | 42N-18S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
7.5 HP, TEFC motor, SS-316, Sanitary Design, 4" DUST TIGHT KNIFE GATE VALVE, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). | STOCK | |
| NEW | 42N-18SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
7.5 HP, TEFC motor, SS-316, Sanitary Design, ALL STAINLESS STEEL, Atmospheric, with center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, , Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) (ADD VALVE AS REQUIRED). | STOCK | |
| NEW | 42N-25 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
10 HP, TEFC motor, SS-304, atmospheric, 4" Dust Tight Knife Gate Valve Center Discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 80-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) | STOCK | |
| NEW | 42N-25S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) | STOCK | |
| NEW | 42N-25S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (4" DUST TIGHT KNIFE GATE VALVE) | STOCK | |
| NEW | 42N-25SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
10 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, ALL STAINLESS STEEL, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). | STOCK | |
| NEW | 42N-36 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
15 HP, TEFC motor, s/s 304, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, all SS 60-grit, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable) with 6" DUST TIGHT KNIFE GATE VALVE. | STOCK | |
| NEW | 42N-36S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
15 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. with 6" DUST TIGHT KNIFE GATE VALVE. (ROSS NOTE: 4V0021) | (4) MAR '24 | |
| NEW | 42N-36SS Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
15 HP, TEFC motor, SS-316, ALL STAINLESS STEEL, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, Shaft Guards, all SS 150-grit finish Int, 80-grit Ext, 230/460 volt, 3 phase, 60 Hz. (ADD VALVE AS REQUIRED). | STOCK | |
| NEW | 42N-52 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
20 hp, TEFC motor, s/s 304, center discharge 36" clearance off floor, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, all SS 80-grit, 230/460 volt, 3 phase, 60 Hz. 8" Dust Tight Knife Gate Valve. | STOCK | |
| NEW | 42N-52 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
20 hp, TEFC motor, s/s 304, center discharge 36" clearance off floor, Stainless Steel Split Stuffing Boxes, Silicone Cover Gasket, all SS 80-grit, 230/460 volt, 3 phase, 60 Hz. 8" Dust Tight Knife Gate Valve. | STOCK (STORAGE) | |
| NEW | 42N-52S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
20 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, neoprene cover gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). (ROSS NOTE: 4V0025) | (3) MAR '24 | |
| NEW | 42N-52S Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
20 HP, TEFC motor, SS-316, Sanitary Design, Atmospheric, center discharge 36" off floor on legs, Safety Limit Switch, Teflon Braided Square Packing, SS-316 Split Stuffing Boxes, neoprene cover gasket, Shaft Guards, all SS 150-grit finish, c/s painted, 230/460 volt, 3 phase, 60 Hz. (High HP Capable). | STOCK | |
| NEW | 42B-1 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 1/2 HP, TEFC motor, SS-304, atmospheric, 99rpm, center discharge 36" off floor, Teflon Braided Square Packing, 1-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 2" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-5 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 1-1/2 HP, TEFC motor, SS-304, atmospheric, 70rpm, center discharge 36" off floor, Teflon Braided Square Packing, 1-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 3" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-10 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 3 HP, TEFC motor, SS-304, atmospheric, 56rpm, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-18 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 5 HP, TEFC motor, (Vertically Mounted Motor), SS-304, 45rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-18 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 5 HP, TEFC motor, (Vertically Mounted Motor), SS-304, 45rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-25 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 7.5 HP, TEFC motor, SS-304, 43rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE | STOCK | |
| NEW | 42B-25 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 7.5 HP, TEFC motor, SS-304, 43rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 4" KNIFE GATE VALVE (NO COVER CLAMPS) | STOCK | |
| NEW | 42B-36 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
"B DESIGN" 10 HP, TEFC motor, SS-304, 40rpm, atmospheric, center discharge 36" off floor, Teflon Braided Square Packing, 2-pc cover w/Silicone Gasket, all SS 60-grit, 230/460 volt, 3 phase, 60 Hz. (Rated @ 35#/CF) 6" KNIFE GATE VALVE (NO COVER CLAMPS) | STOCK | |
| RECON | CVD-007 Ribbon Blender Dry Blender Horizontal Mixer Dryer Plow Blender Powder Blender |
100757 | Cylindrical Vacuum Dryer, 7.5 cubic foot working, 9.6 cubic full holding, SS-304, 50psig @ 500F CS jacket, 3" roto-disc valve, thermo, 2 - 6" tri-clover port, 2 - 1"-150# couplings, Alum split stuffing boxes, 7.5HP XP INV Duty 10:1, 43rpm out, Paddle and Ribbon center discharge agitators, hollow shaft w/rotary union, 150-grit int, 2" fibreglass insulation, blast finish ext, Nema 4 VFD. (Filter Housing $21680) **** | STOCK |
| NEW | VCB-5 V Cone Blender Tumble Blender Dry Powder Blender |
114851 | 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) | 2-WEEKS |
| NEW | VCB-5 V Cone Blender Tumble Blender Dry Powder Blender |
114867 | 5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 24RPM, 3HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 6" BUTTERFLY VALVE, 24" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460V, NO CONTROLS. (150#/Cu.Ft.) | STOCK |
| RECON | VCB-7.5 V Cone Blender Tumble Blender Dry Powder Blender |
115311 | 7.5CF, V-CONE BLENDER, 5HP TEFC, ATMOSPHERIC, SS-316, 80-GRIT FINISH INT, MILL FINISH EXT, 20RPM, 5HP INTENSIFIER BAR, PAINTED STEEL SUPPORT, 8" BUTTERFLY VALVE, 36" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230 NEMA-12 CONTROL PANEL (LOOSE). (150#/Cu.Ft.) | 4-WEEKS |
| RECON | DCB-10 V Cone Blender Tumble Blender Dry Powder Blender |
114384 | 10CF/283.2-Liter, DOUBLE CONE BLENDER, 7.5HP XP, ATMOSPHERIC, SS-304, 150-GRIT FINISH INT, 80-GRIT EXT FINISH, 20RPM, INTENSIFIER/SPRAY BAR AND 5HP XP MOTOR DRIVE WITH MAGNETIC SEALS, PAINTED STEEL SUPPORT, 8" BUTTERFLY VALVE, 36" CLEARANCE UNDER VALVE, MECHANICAL SAFETY RAILING WITH LIMIT SWITCH, 3/60/230V, NEMA 12 CONTROL PANEL TOUCH-SCREEN, E-STOP, DISCONNECT, NEMA 7/9 XP OPERATOR PANEL WITH START/STOP/POT/JOG/ESTOP. (125#/Cu.Ft.) | 2-4 WEEKS |
| RECON | VCB-5 |
109415 | 5CF/140Liter, V-CONE TUMBLE BLENDER, T316, 5HP TEFC MOTOR OPERATING AT 3-22RPM, ATMOSPHERIC, SS-316, 240-GRIT/MIRROR INT FINISH, 150-GRIT EXT, SS-304 SUPPORT W/150-GRIT, 6" BUTTERFLY VALVE W/SILICON SEAT, 24" CLEARANCE UNDER VALVE, SAFETY RAILING WITH LIMIT SWITCH, 3/60/230/460. 5CF/125#/CF MAX. | 4-WEEKS |
| RECON | VCB-5 |
114866 | 5CF/140Liter, V-CONE TUMBLE BLENDER, T316, 5HP TEFC BRAKE MOTOR OPERATING AT 3-24RPM, 3HP INTENSIFIER BAR, ATMOSPHERIC, SS-316, 150-GRIT INT FINISH, 80-GRIT EXT, CS/PAINTED SUPPORT, 6" TC BUTTERFLY VALVE W/SILICON SEAT, 24" CLEARANCE UNDER VALVE, SAFETY RAILING WITH LIMIT SWITCH, 3/60/460 3HP 7 5HP VFD'S MOUNTED TO BLENDER. 5CF/125#/CF MAX. | TBD |
| RECON | TE.3-50 Turboemulsifier Counter Rotating Mixer |
67556 | Sanitary specs, vacuum pump, heater/chiller, self contained, raise/Lower, Vac Pump on/off, 2 inverters, other controls are not included, call for specs. (2) Vfd's | STOCK |
| NEW | HSM-100LSK-I Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab |
HSM-100LSK-I with VFD design, 3/4HP, 1/60/115v 20amps, 500-10,000rpm, HSM. (Available options: HSD, Micro, In-Line, Quad, DT Prop, Various Stators, Bushings, HSD blades, Props, Beaker Clamp, Vessels.) | 1-2 DAYS | |
| NEW | HSM-100 LCIT-MINI Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab |
LCIT-MINI. SS-316 Wetted Parts, 1/2HP Drive, Nema 12 IEC Motor, 115 volts, 1Ph, 50/60Hz, 10amps.Variable Speed 950-19,000rpm (speed calibration to +/-1%), Constant Torque. TOUCH SCREEN CONTROL with Start/Stop, Speed, Time, Digital Display for Speed Display, Temperature Display (0-300F or 0-150C, RTD Temp Probe is an option), Batch Timer Display and Percent of Load Display, Calibration Screens for Temp and Speed. Raise/Lower Lift Push-Buttons, Calibration, Timer and other Function Controls. With SS-316 Disperser and 1" HSD Blade (5,000fpm tip speed at 19,000rpm).Temp Probe and Beaker Clamp are available. - DESIGNED FOR USE WITH SMALL VESSELS OF 1-GALLON OR LESS. - HSM OPTION NOT YET AVAILABLE. | 2-3 WEEKS | |
| NEW | HSM-100LCIT Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab |
SS-316 Wetted Parts, 1HP Drive, Nema 12 IEC Motor, 115 volts, 1Ph, 50/60Hz, 20amps. (option for 1/50/60/190 or 230v). Variable Speed 500-10,000rpm (speed calibration to +/-1%), Constant Torque. TOUCH SCREEN CONTROL with Start/Stop, Speed, Time, Digital Display for Speed Display, Temperature Display (0-300F or 0-150C, RTD Temp Probe is an option), Batch Timer Display and Percent of Load Display, Calibration Screens for Temp and Speed. Raise/Lower Lift Push-Buttons, Calibration, Timer and other Function Controls. With SS-316 M/E Assembly, Disintegrating, Slotted & Fine Screen Heads, Teflon Bushing. Options: Disperser, Micro, Inline, Quad, Temp Probe and Beaker Clamp are available. | STOCK | |
| NEW | HSM100LH-1 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
1HP High Shear Rotor/Stator Mixer, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 1-3/8" Dia ME operating at 10,000rpm, Slotted Head, Teflon Bushing, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: Other Stators and Bushings, VFD, Bench, Interchangeable Disperser and In-Line (Same as 400DL). In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. | 1 WEEK | |
| NEW | HSM100LH-2 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
2HP High Shear Rotor/Stator Mixer, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 2" Dia ME operating at 6900rpm, Slotted Head, Teflon Bushing, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: Other Stators and Bushings, VFD, Bench, Interchangeable Disperser and In-Line. In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. | 1 WEEK | |
| NEW | HSM100LH-2 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
2HP High Shear Rotor/Stator Mixer, AIR/OIL HYD LIFT, Table/Bench Mount Design, Disperseer Assembly with 3" Blade operating at 6900rpm, Shaft Guard, XP Limit Switches, Adj Can Lock, Inverter Duty 10:1 TEFC Motor, | 1 WEEK | |
| NEW | HSM-101 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. | STOCK | |
| NEW | HSM-105 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. | STOCK | |
| NEW | HSM-110 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
Std per price sheets, T-316 wetted parts, XP, 50/60 Hz motors, slotted head, Teflon. | STOCK | |
| NEW | HSM400DLA Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
Basic Design. (Model 1), 1HP TEFC 3/60/230/460v VFD Capable Motor, Single Mech Seal 45psig, Viton, SS-316/80-grit, Slotted Head. Carbon Steel Painted. Add Bench, Controls, etc as required. | 1-2 WEEKS | |
| NEW | HSM400DLA Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
Enclosed Design, Carbon Steel Painted Base, Riser and Bench, 1HP TEFC VFD rated Motor 3/60/230/460v, 10,000rpm, Double Mechanical Seal (Kalrez) 250psig w/ Barrier Tank, Viton Orings, Slotted, Fine Screen & Disentigrating Stators, NPT Inlet and Outlet, 1HP Nema 12 VFD 3/60/230v. Leveling Pads. Mix Chamber Pressure Gauge, Inlet and Outlet Valves. Choose from many options on price sheet. | 1-2 WEEKS | |
| NEW | HSM-401 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
1.5HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. | STOCK | |
| NEW | HSM-405 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
5HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. | STOCK | |
| NEW | HSM-410 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
10HP, Std Specs, slotted head, Chesterton 155, Viton, single seal. | STOCK | |
| NEW | HSM-450 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer |
118552 | 50HP, XP, 230/460, 60 Hz, slotted head, Double mechanical seal (SC vs SC) with Barrier system incl Tank, Viton, Owned by CRS | STOCK |
| RECON | HSM-100LSK-I Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab |
215995 | HSM-100LSK-I with VFD design, 3/4HP, 1/60/115v 20amps, 500-10,000rpm, HSD. | STOCK |
| RECON | HSM-100LSK-I Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer Benchtop Lab |
217744 | HSM-100LSK-I with VFD design, 3/4HP, 1/60/115v 20amps, 500-10,000rpm, HSM. | STOCK |
| RECON | HSM-101 Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
116583 | SS-316 wetted parts, 1.5HP XP, Slotted stator head, Teflon Bushing, 1.5HP 230v VFD Nema-4X. CHECK SPEC'S UPON RETURN (HAVE NOT RECEIVED, 7.5.24) | 2 WEEKS |
| RECON | HSM-400DLA Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
218332 | Std 400DLA. Single Mech Seal, CS Flat Base, Leveling Pads, 1.5HP XP VFD rated Motor 3/60/230/460v, 10,000rpm, Single Mechanical Seal 125psig w/Viton, Viton Chamber orings, SS-316, 80-grit, Round Hole, Slotted & Fine Screen Stators, NPT Inlet (3/4") & Outlet (3/8"). Nema 4X, 3/60/230v, 1.5HP VFD mounted & wired. | 1 WEEK |
| RECON | ME-401 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
72383 | XP, 1.5HP, 3/60/230/460V, slotted head, NPT, 130psig, Viton, single seal. | STOCK |
| RECON | HSM-401 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
204614 | XP, 1.5HP, 3/60/230/460V, slotted head, NPT, 130psig, Viton, single seal. | 2-3 WEEKS |
| RECON | HSM-401 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
214796 | XP, 1.5HP, 3/60/230/460V, slotted head, NPT, 130psig, Viton, single seal. (VFD, 4X, 230v +$2272) | 1 WEEK |
| RECON | HSM-405 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
217305 | XP, 5HP, 3600rpm, slotted stator, Kalrez, Double Mech Seal w/Barrier Tank, Viton, NPT inlet/outlet. SS Cart, blast finish, SS Casters. Nema 4X 3/60/460v VFD. | STOCK |
| RECON | HSM-410 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
216056 | 10HP, XP, Single Mechanical Seal (130psig), slotted head, 2" FNPT outlet, 2-1/2" FNPT inlet, SS-316, Viton. Nema 4X 10HP 230v VFD. | 2 WEEKS |
| RECON | HSM-410 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
218166 | 10HP, XP, Double Mechanical Seal (130psig) w/Barrier Tank, slotted head (Stellite) w/Stellite Tipped Rotor, 2" FNPT outlet, 2-1/2" FNPT inlet, SS-316, Viton. NO CONTROLS. | STOCK |
| RECON | HSM-410S Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
60667 | 10HP XP, Washdown, Double Mechanical Seal w/barrier tank, slotted head, 2" TC outlet, 2-1/2" TC inlet, SS-316, 150-grit, Viton. Voss Clamps on mix chamber. (10HP VFD, 230V) | 2-WEEKS |
| RECON | HSM-425 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
217186 | 25HP, XP, Single Mechanical Seal (130psig), Fine Screen, 3" ANSI Flange outlet, 2-1/2" ANSI Flange inlet, SS-316, Viton. | 3 WEEKS |
| RECON | HSM-425 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
206980 | 25HP, XP, Single Mechanical Seal (130psig), slotted head, 3" ANSI Flange outlet, 2-1/2" ANSI Flange inlet, SS-316, Viton. | 3-4 WEEKS |
| RECON | HSM-425 Inline High Shear Mixer Rotor stator Mixer Emulsifier Eductor Pump Homogenizer |
107713 | 25HP, XP, Single Mechanical Seal (130psig), slotted head, 3" ANSI Flange outlet, 2-1/2" ANSI Flange inlet, SS-316, Viton. | 3-4 WEEKS |
| RECON | HSM-430S Vacuum Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
106868 | 30HP, TEFC-WASHDOWN, Double Mechanical Seal w/Barrier Tank (100PSI max), slotted, 3" TC outlet, 4" TC inlet, SS-316, Viton. SS Base. Direct drive, 7" rotor at 1800rpm. Voss Clamp. NO CONTROLS. (30HP VFD 4X 460v $4888) | 2-3 WEEKS |
| RECON | HSM-501 Vacuum Batch High Shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
66803 | slotted head, 1-1/2HP XP 230/460, 3/60Hz, bronze bushing, single or double mech seal. Hanging Bracket.**** | 2-3 WEEKS |
| NEW | HSM-400SC-5 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
Modified HSM-400 Lab Size Design, Sanitary, Horizontal, 5HP TEFC, double-mechanical seal and barrier tank, viton, SS-316, 80grit, 1" tri-clamp inlet & outlet with IN-LINE SLIM (I-SLIM) w/Hose & Wand, one-piece inlet/stator-slotted head. CS Flat Base, CS Tube Riser with Leveling Pads. Nema 1 VFD 3/60/230v, mounted and wired. Carbon Steel Painted Drive Base, Flat Base and Tube Riser. No drive enclosure. | 2-3 WEEKS | |
| NEW | HSM-405SC-25 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
117904 | Modified HSM-405 design, Sanitary, Horizontal, 25HP XP, Viton mix chamber O-rings, double-mechanical seal and barrier tank w/liquid level switch, SS-316, 150grit, Wing Nuts, One 2" TC Inlet and one 2" tri-clamp outlet with IN-LINE SLIM (I-SLIM) 1-1/2" SLIM Port, w/Hose & Wand and Hopper with integrated Bench Top, one-piece inlet/stator-large square head. SS 2-cuft Hopper for powder loading, SS portable cart with casters. Nema-4X 3/60/460v VFD (loose), XP OP Station S/S/P/E (mounted), Nema-12 DC Power supply and I/S Barrier for Level Switch (230v). | 1-2 WEEKS |
| RECON | HSM-400SC-5 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
210631 | Modified HSM-400 Lab Size Design, Sanitary, Horizontal, 5HP XP, double-mechanical seal w/Kalrez and barrier tank, Silicon Mix Cahmber Orings, SS-316, 150grit, 1" tri-clamp inlet & outlet with IN-LINE SLIM (I-SLIM), one-piece inlet/stator-large square head. Hose & Wand for powder loading. ALL STAINLESS STEEL ENCLOSURE, Base & Riser Panel mounted on SS casters. Nema-4 5HP 230v VFD. | 2-3 WEEKS |
| RECON | HSM-401SC-15 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
209881 | In-Line SLIM, Sanitary, Horizontal, 15HP XP, double-mechanical seal and barrier tank, viton, SS-316, 150grit, 1.5" tri-clamp inlet & outlet with 1" TC IN-LINE SLIM (I-SLIM) w/hopper, inlet/stator-large square head. SS Hopper. HOSE & WAND for powder loading, SS portable cart with casters. Nema 4X 15HP VFD 460v. | 3-4 WEEKS |
| RECON | HSM-405SC-25 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
307871 | Modified HSM-405 design, Sanitary, Horizontal, 25HP XP, Viton mix chamber O-rings, double-mechanical seal and barrier tank and Kalrez O-rings, SS-316, 150grit, Wing Nuts, One 2" TC Inlet and one 2" tri-clamp outlet with IN-LINE SLIM (I-SLIM) 1-1/2" SLIM Port, w/hopper, one-piece inlet/stator-large square head. SS 2-cuft Hopper for powder loading, SS portable cart with casters. Nema-4X, 460v VFD. (PENDING SALE) | 1-2 WEEKS |
| RECON | HSM-405SC-25 Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
216310 | In-Line SLIM, Sanitary, Horizontal, 25HP TEFC Washdown Motor, Viton O-ring for the mixing chamber, double-mechanical seal with silicon carbide seal faces vs. silicon carbide seal faces and Kalrez O-rings and barrier tank, SS-316, 150grit, Wing Nuts, One 2" TC Inlet and one 2" tri-clamp outlet (top) with IN-LINE SLIM (I-SLIM) 1-1/2" TC SLIM Port, w/hopper, one-piece inlet/stator-large square head. SS 2-cuft Hopper plus tube/wand for powder loading, SS portable cart with casters. Nema-4X VFD 25HP 3/60/460v, wired/mounted. | 2-3 WEEKS. |
| RECON | HSM-430SC Inline High Shear Mixer Rotor Stator Mixer Emulsifier Eductor Pump Homogenizer SLIM |
216127 | In-Line SLIM, Sanitary, Horizontal, 30HP XP, 1800rpm (direct drive) double-mechanical seal and barrier tank, viton, SS-316, 150grit, 3" tri-clamp inlet & outlet, IN-LINE SLIM (I-SLIM, 2-1/2"TC Port) w/2cf hopper, inlet/stator-large square head. SS Hopper assembly for powder loading, SS portable cart with casters. N4X 30HP VFD 3/60/460v, mounted and wired. | 1-WEEK |
| NEW | HSM100LH-1 Batch High shear Mixer Rotor Stator Mixer Emulsifier Homogenizer |
1HP High Speed Disperser, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 2" Disperser Blade operating at 10,000rpm, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: VFD, Bench, Interchangeable ME (Same as LC) and In-Line (Same as 400DL). In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. | 1 WEEK | |
| NEW | HSM100LH-2 High Speed Disperser Batch |
2HP High Speed Disperser, Air/Oil Hydraulic Lift, Table/Bench Mount Design, 3.5" Disperser Blade operating at 5700rpm, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, Inverter Duty 10:1 TEFC Motor. OPTIONS: VFD, Bench, Interchangeable ME and In-Line. In-line can be used with QUAD and Double Mechaincal Seals w/Barrier Tank. | 1 WEEK | |
| NEW | HSD-5 High Speed Disperser Batch |
5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 6" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $638 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-7.5 High Speed Disperser Batch |
7.5hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 8" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $681 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-10 High Speed Disperser Batch |
10hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 10" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $806 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-15 High Speed Disperser Batch |
15hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 12" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $981 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-20 High Speed Disperser Batch |
20hp High Speed Disperser, Lift Mounted on floor w/48" Rise, 14" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $1119 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-25 High Speed Disperser Batch |
25hp High Speed Disperser, Lift Mounted on floor w/54" Rise, 16" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $1313 for XP motor) | 1-2 WEEKS | |
| NEW | HSD-30 High Speed Disperser Batch |
30hp High Speed Disperser, Lift Mounted on floor w/54" Rise, 16" Blade @ 8" off floor, SS-304, Shaft Guard, Limit Switches, Adj. Can Lock, TEFC Motor. (Add $1288 for XP motor) | 1-2 WEEKS | |
| RECON | HSD-5-VAC High Speed Disperser Batch |
106702 | 5HP XP High Speed Disperser, Air/Oil Lift Mounted on floor w/30" Rise, 5" Blade, 3740rpm, @ 3.5" off inside bottom of the mix vessel, adjustable blades, SS-304, VITON, XP Limit Switches, Can Lock, Vac Cover with two 2" S&G Ports, 1/2" NPT Port, Veseel to Cover Clamps (4). Mix Vessel, Vacuum, 15-Gal Working, 20-Gal Full Holding, Dished Bottom, 50psig @ 150f SS Jacket, Thermo, 80-grit finish int/ext, 2" FBBV NPT @ 22.5" off the floor, Legs, Casters. XP Op Station, S/S/Pot/Estop, Speed & Load, Nema-1 5HP VFD, 3/60/230v. | 3-4 WEEKS |
| NEW | PBA-2 Mix Vessel |
2HP TEFC, AIR/OIL, SS-304, 80-GRIT, TABLE MOUNT DESIGN, MOUNTED ON BENCH, 36-540RPM (6-90Hz), 6" 3-WING BOW-TIE BLADE (OTHER SIZES/TYPES AVAILABLE), | 3-4 WEEKS | |
| NEW | PBA-5TMD w/500-GAL Tank Mix Vessel |
PBA-5TMD, 5HP TEFC, 3/60/230/460v, Anchor Agitator (2-Wing) operating at 33rpm, Tank Mounted, Direct Drive w/right angle gear reducer, 500-Gallon Working Volume Mix Vessel, 590-Full Holding, T304, Atmospheric design, Drive Support with open top, F&D Dished bottom, (3) T304 support legs with 6-1/2" Sq x 1/2" Tk mounting pads, (2) T304 lift lugs. 48" ID x 72" St Side Wall x 8" Deep Dished Bottom. Rolled Angle upper rim (2" wide). One (1) 3" 150# ANSI Flange Outlet, center bottom, located at 41-1/2" off the floor. Mill Finish, Internal Welds ground smooth. OAH = 131". (Canvas Beauty SN-307205-A) (1657-lbs) | STOCK | |
| NEW | PBA-5TMD w/500-GAL Tank Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade |
PBA-5TMD, 5HP TEFC, 3/60/230/460v, Anchor Agitator (2-Wing) operating at 33rpm, Tank Mounted, Direct Drive w/right angle gear reducer, 500-Gallon Working Volume Mix Vessel, 590-Full Holding, T304, Atmospheric design, Drive Support with open top, F&D Dished bottom, (3) T304 support legs with 6-1/2" Sq x 1/2" Tk mounting pads, (2) T304 lift lugs. 48" ID x 72" St Side Wall x 8" Deep Dished Bottom. Rolled Angle upper rim (2" wide). One (1) 3" 150# ANSI Flange Outlet, center bottom, located at 41-1/2" off the floor. Mill Finish, Internal Welds ground smooth. OAH = 131". (Canvas Beauty SN-307205-A) (1657-lbs) | STOCK | |
| RECON | PBA-1 Paddle Blade Agitator Gentle Agitator High Viscosity Disperser Bowtie Pitched Blade |
111827 | 1HP XP, AIR/OIL LIFT, SS-304, 80-GRIT, VITON, FLOOR MOUNT DESIGN, 9-90RPM, 7.5" DIA 4-BLADE AXIAL FLOW 45-DEGREE PITCHED PADDLE BLADE (@ 24" OFF FLOOR), VACUUM AND +2PSIG COVER WITH 2-4" 150# FLANGES W/BLIND CAPS, 2-1" FNPT PORTS, 1-6" S&G PORT (METAGLASS), 1-1" TC PORT, 2-1" 150# FLANGES W/BLIND CAPS. CONTROL PANEL, 4X-SS-XP PURGED, 3/60/460V, 4" COLOR DISPLAY, S/S/E-STOP, TIMER, TEMP, 1HP-VFD, MOUNTED/WIRED. MIX VESSEL, T316 80-grit, 36-GAL WORKING, 44-GAL FULL HOLDING, 22" ID X 24" STSD, DISHED BOTTOM, 30PSIG/350f SS JACKET w/1" NPT Ports, THERMO, 2" NPT FBBV, CLAMPS, THREE LEGS WITH CASTERS. | 2-4 WEEKS |
Copyright 2017 Charles Ross & Son Company. All rights reserved.